package org.djutils.draw.line;
   
   import java.util.Map;
   import java.util.NavigableMap;
   import java.util.TreeMap;
   
   import org.djutils.draw.DrawRuntimeException;
   import org.djutils.draw.Transform2d;
   import org.djutils.draw.point.Point2d;
  import org.djutils.draw.point.Point3d;
  import org.djutils.exceptions.Throw;
  
  /**
   * Generation of B&eacute;zier curves. <br>
   * The class implements the cubic(...) method to generate a cubic B&eacute;zier curve using the following formula: B(t) = (1 -
   * t)<sup>3</sup>P<sub>0</sub> + 3t(1 - t)<sup>2</sup> P<sub>1</sub> + 3t<sup>2</sup> (1 - t) P<sub>2</sub> + t<sup>3</sup>
   * P<sub>3</sub> where P<sub>0</sub> and P<sub>3</sub> are the end points, and P<sub>1</sub> and P<sub>2</sub> the control
   * points. <br>
   * For a smooth movement, one of the standard implementations if the cubic(...) function offered is the case where P<sub>1</sub>
   * is positioned halfway between P<sub>0</sub> and P<sub>3</sub> starting from P<sub>0</sub> in the direction of P<sub>3</sub>,
   * and P<sub>2</sub> is positioned halfway between P<sub>3</sub> and P<sub>0</sub> starting from P<sub>3</sub> in the direction
   * of P<sub>0</sub>.<br>
   * Finally, an n-point generalization of the B&eacute;zier curve is implemented with the bezier(...) function.
   * <p>
   * Copyright (c) 2013-2024 Delft University of Technology, PO Box 5, 2600 AA, Delft, the Netherlands. All rights reserved. <br>
   * BSD-style license. See <a href="http://opentrafficsim.org/docs/license.html">OpenTrafficSim License</a>.
   * </p>
   * @author <a href="https://www.tbm.tudelft.nl/averbraeck">Alexander Verbraeck</a>
   * @author <a href="https://www.tudelft.nl/pknoppers">Peter Knoppers</a>
   */
  public final class Bezier
  {
      /** The default number of points to use to construct a B&eacute;zier curve. */
      public static final int DEFAULT_BEZIER_SIZE = 64;
  
      /** Cached factorial values. */
      private static long[] fact = new long[] {1L, 1L, 2L, 6L, 24L, 120L, 720L, 5040L, 40320L, 362880L, 3628800L, 39916800L,
              479001600L, 6227020800L, 87178291200L, 1307674368000L, 20922789888000L, 355687428096000L, 6402373705728000L,
              121645100408832000L, 2432902008176640000L};
  
      /** Utility class. */
      private Bezier()
      {
          // do not instantiate
      }
  
      /**
       * Approximate a cubic B&eacute;zier curve from start to end with two control points.
       * @param size int; the number of points of the B&eacute;zier curve
       * @param start Point2d; the start point of the B&eacute;zier curve
       * @param control1 Point2d; the first control point
       * @param control2 Point2d; the second control point
       * @param end Point2d; the end point of the B&eacute;zier curve
       * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the two provided control
       *         points
       * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
       *             constructed
       */
      public static PolyLine2d cubic(final int size, final Point2d start, final Point2d control1, final Point2d control2,
              final Point2d end) throws DrawRuntimeException
      {
          Throw.when(size < 2, DrawRuntimeException.class, "Too few points (specified %d; minimum is 2)", size);
          Point2d[] points = new Point2d[size];
          for (int n = 0; n < size; n++)
          {
              double t = n / (size - 1.0);
              double x = B3(t, start.x, control1.x, control2.x, end.x);
              double y = B3(t, start.y, control1.y, control2.y, end.y);
              points[n] = new Point2d(x, y);
          }
          return new PolyLine2d(points);
      }
  
      /**
       * Approximate a cubic B&eacute;zier curve from start to end with two control points with a specified precision.
       * @param epsilon double; the precision.
       * @param start Point2d; the start point of the B&eacute;zier curve
       * @param control1 Point2d; the first control point
       * @param control2 Point2d; the second control point
       * @param end Point2d; the end point of the B&eacute;zier curve
       * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the two provided control
       *         points
       * @throws DrawRuntimeException in case the number of points is less than 2, or the B&eacute;zier curve could not be
       *             constructed
       */
      public static PolyLine2d cubic(final double epsilon, final Point2d start, final Point2d control1, final Point2d control2,
              final Point2d end) throws DrawRuntimeException
      {
          return bezier(epsilon, start, control1, control2, end);
      }
  
      /**
       * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
       * start and end.
       * @param size int; the number of points of the B&eacute;zier curve
       * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
       * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
       * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the directions of those
       *         points at start and end
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d cubic(final int size, final Ray2d start, final Ray2d end) throws DrawRuntimeException
     {
         return cubic(size, start, end, 1.0);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end with specified precision.
      * @param epsilon double; the precision.
      * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the directions of those
      *         points at start and end
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d cubic(final double epsilon, final Ray2d start, final Ray2d end) throws DrawRuntimeException
     {
         return cubic(epsilon, start, end, 1.0);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end.
      * @param size int; the number of points for the B&eacute;zier curve
      * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0 and finite
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the directions of those
      *         points at start and end
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d cubic(final int size, final Ray2d start, final Ray2d end, final double shape)
             throws DrawRuntimeException
     {
         Throw.when(Double.isNaN(shape) || Double.isInfinite(shape) || shape <= 0, DrawRuntimeException.class,
                 "shape must be a finite, positive value");
         return cubic(size, start, end, shape, false);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end with specified precision.
      * @param epsilon double; the precision.
      * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0 and finite
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the directions of those
      *         points at start and end
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d cubic(final double epsilon, final Ray2d start, final Ray2d end, final double shape)
             throws DrawRuntimeException
     {
         Throw.when(Double.isNaN(shape) || Double.isInfinite(shape) || shape <= 0, DrawRuntimeException.class,
                 "shape must be a finite, positive value");
         return cubic(epsilon, start, end, shape, false);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end.
      * @param size int; the number of points for the B&eacute;zier curve
      * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0, finite and not NaN
      * @param weighted boolean; control point distance relates to distance to projected point on extended line from other end
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, with the two determined
      *         control points
      * @throws NullPointerException when start or end is null
      * @throws DrawRuntimeException in case size is less than 2, start is at the same location as end, shape is invalid, or the
      *             B&eacute;zier curve could not be constructed
      */
     public static PolyLine2d cubic(final int size, final Ray2d start, final Ray2d end, final double shape,
             final boolean weighted) throws NullPointerException, DrawRuntimeException
     {
         Point2d[] points = createControlPoints(start, end, shape, weighted);
         return cubic(size, points[0], points[1], points[2], points[3]);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end with specified precision.
      * @param epsilon double; the precision.
      * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0, finite and not NaN
      * @param weighted boolean; control point distance relates to distance to projected point on extended line from other end
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, with the two determined
      *         control points
      * @throws NullPointerException when start or end is null
      * @throws DrawRuntimeException in case size is less than 2, start is at the same location as end, shape is invalid
      */
     public static PolyLine2d cubic(final double epsilon, final Ray2d start, final Ray2d end, final double shape,
             final boolean weighted) throws NullPointerException, DrawRuntimeException
     {
         Point2d[] points = createControlPoints(start, end, shape, weighted);
         return cubic(epsilon, points[0], points[1], points[2], points[3]);
     }
 
     /** Unit vector for transformations in createControlPoints. */
     private static final Point2d UNIT_VECTOR2D = new Point2d(1, 0);
 
     /**
      * Create control points for a cubic B&eacute;zier curve defined by two Rays.
      * @param start Ray2d; the start point (and direction)
      * @param end Ray2d; the end point (and direction)
      * @param shape double; the shape; higher values put the generated control points further away from end and result in a
      *            pointier B&eacute;zier curve
      * @param weighted boolean;
      * @return Point2d[]; an array of four Point2d elements: start, the first control point, the second control point, end.
      * @throws DrawRuntimeException when shape is invalid
      */
     private static Point2d[] createControlPoints(final Ray2d start, final Ray2d end, final double shape, final boolean weighted)
             throws DrawRuntimeException
     {
         Throw.whenNull(start, "start point may not be null");
         Throw.whenNull(end, "end point may not be null");
         Throw.when(start.distanceSquared(end) == 0, DrawRuntimeException.class,
                 "Cannot create control points if start and end points coincide");
         Throw.when(Double.isNaN(shape) || shape <= 0 || Double.isInfinite(shape), DrawRuntimeException.class,
                 "shape must be a finite, positive value");
 
         Point2d control1;
         Point2d control2;
         if (weighted)
         {
             // each control point is 'w' * the distance between the end-points away from the respective end point
             // 'w' is a weight given by the distance from the end point to the extended line of the other end point
             double distance = shape * start.distance(end);
             double dStart = start.distance(end.projectOrthogonalExtended(start));
             double dEnd = end.distance(start.projectOrthogonalExtended(end));
             double wStart = dStart / (dStart + dEnd);
             double wEnd = dEnd / (dStart + dEnd);
             control1 = new Transform2d().translate(start).rotation(start.phi).scale(distance * wStart, distance * wStart)
                     .transform(UNIT_VECTOR2D);
             // - (minus) as the angle is where the line leaves, i.e. from shape point to end
             control2 = new Transform2d().translate(end).rotation(end.phi + Math.PI).scale(distance * wEnd, distance * wEnd)
                     .transform(UNIT_VECTOR2D);
         }
         else
         {
             // each control point is half the distance between the end-points away from the respective end point
             double distance = shape * start.distance(end) / 2.0;
             control1 = start.getLocation(distance);
             // new Transform2d().translate(start).rotation(start.phi).scale(distance, distance).transform(UNIT_VECTOR2D);
             control2 = end.getLocationExtended(-distance);
             // new Transform2d().translate(end).rotation(end.phi + Math.PI).scale(distance, distance).transform(UNIT_VECTOR2D);
         }
         return new Point2d[] {start, control1, control2, end};
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end. The size of the constructed curve is <code>DEFAULT_BEZIER_SIZE</code>.
      * @param start Ray2d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray2d; the end point and end direction of the B&eacute;zier curve
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, following the directions of
      *         those points at start and end
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d cubic(final Ray2d start, final Ray2d end) throws DrawRuntimeException
     {
         return cubic(DEFAULT_BEZIER_SIZE, start, end);
     }
 
     /**
      * Approximate a B&eacute;zier curve of degree n.
      * @param size int; the number of points for the B&eacute;zier curve to be constructed
      * @param points Point2d...; the points of the curve, where the first and last are begin and end point, and the intermediate
      *            ones are control points. There should be at least two points.
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the provided control
      *         points
      * @throws NullPointerException when points contains a null
      * @throws DrawRuntimeException in case the number of points is less than 2, size is less than 2, or the B&eacute;zier curve
      *             could not be constructed
      */
     public static PolyLine2d bezier(final int size, final Point2d... points) throws NullPointerException, DrawRuntimeException
     {
         Throw.when(points.length < 2, DrawRuntimeException.class, "Too few points; need at least two");
         Throw.when(size < 2, DrawRuntimeException.class, "size too small (must be at least 2)");
         Point2d[] result = new Point2d[size];
         double[] px = new double[points.length];
         double[] py = new double[points.length];
         for (int i = 0; i < points.length; i++)
         {
             Point2d p = points[i];
             Throw.whenNull(p, "points contains a null value");
             px[i] = p.x;
             py[i] = p.y;
         }
         for (int n = 0; n < size; n++)
         {
             double t = n / (size - 1.0);
             double x = Bn(t, px);
             double y = Bn(t, py);
             result[n] = new Point2d(x, y);
         }
         return new PolyLine2d(result);
     }
 
     /**
      * Approximate a B&eacute;zier curve of degree n using <code>DEFAULT_BEZIER_SIZE</code> points.
      * @param points Point2d...; the points of the curve, where the first and last are begin and end point, and the intermediate
      *            ones are control points. There should be at least two points.
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, using the provided control
      *         points
      * @throws NullPointerException when points contains a null value
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d bezier(final Point2d... points) throws NullPointerException, DrawRuntimeException
     {
         return bezier(DEFAULT_BEZIER_SIZE, points);
     }
 
     /**
      * Approximate a B&eacute;zier curve of degree n with a specified precision.
      * @param epsilon double; the precision.
      * @param points Point2d...; the points of the curve, where the first and last are begin and end point, and the intermediate
      *            ones are control points. There should be at least two points.
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, with the provided control
      *         points
      * @throws NullPointerException when points contains a null value
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine2d bezier(final double epsilon, final Point2d... points)
             throws NullPointerException, DrawRuntimeException
     {
         Throw.when(points.length < 2, DrawRuntimeException.class, "Too few points; need at least two");
         Throw.when(Double.isNaN(epsilon) || epsilon <= 0, DrawRuntimeException.class,
                 "epsilonPosition must be a positive number");
         if (points.length == 2)
         {
             return new PolyLine2d(points[0], points[1]);
         }
         NavigableMap<Double, Point2d> result = new TreeMap<>();
         double[] px = new double[points.length];
         double[] py = new double[points.length];
         for (int i = 0; i < points.length; i++)
         {
             Point2d p = points[i];
             Throw.whenNull(p, "points contains a null value");
             px[i] = p.x;
             py[i] = p.y;
         }
         int initialSize = points.length - 1;
         for (int n = 0; n < initialSize; n++)
         {
             double t = n / (initialSize - 1.0);
             double x = Bn(t, px);
             double y = Bn(t, py);
             result.put(t, new Point2d(x, y));
         }
         // Walk along all point pairs and see if additional points need to be inserted
         Double prevT = result.firstKey();
         Point2d prevPoint = result.get(prevT);
         Map.Entry<Double, Point2d> entry;
         while ((entry = result.higherEntry(prevT)) != null)
         {
             Double nextT = entry.getKey();
             Point2d nextPoint = entry.getValue();
             double medianT = (prevT + nextT) / 2;
             double x = Bn(medianT, px);
             double y = Bn(medianT, py);
             Point2d medianPoint = new Point2d(x, y);
             Point2d projectedPoint = medianPoint.closestPointOnSegment(prevPoint, nextPoint);
             double errorPosition = medianPoint.distance(projectedPoint);
             if (errorPosition >= epsilon)
             {
                 // We need to insert another point
                 result.put(medianT, medianPoint);
                 continue;
             }
             if (prevPoint.distance(nextPoint) > epsilon)
             {
                 // Check for an inflection point by creating additional points at one quarter and three quarters. If these
                 // are on opposite sides of the line from prevPoint to nextPoint; there must be an inflection point.
                 // https://stackoverflow.com/questions/1560492/how-to-tell-whether-a-point-is-to-the-right-or-left-side-of-a-line
                 double quarterT = (prevT + medianT) / 2;
                 double quarterX = Bn(quarterT, px);
                 double quarterY = Bn(quarterT, py);
                 int sign1 = (int) Math.signum((nextPoint.x - prevPoint.x) * (quarterY - prevPoint.y)
                         - (nextPoint.y - prevPoint.y) * (quarterX - prevPoint.x));
                 double threeQuarterT = (nextT + medianT) / 2;
                 double threeQuarterX = Bn(threeQuarterT, px);
                 double threeQuarterY = Bn(threeQuarterT, py);
                 int sign2 = (int) Math.signum((nextPoint.x - prevPoint.x) * (threeQuarterY - prevPoint.y)
                         - (nextPoint.y - prevPoint.y) * (threeQuarterX - prevPoint.x));
                 if (sign1 != sign2)
                 {
                     // There is an inflection point
                     // System.out.println("Detected inflection point between " + prevPoint + " and " + nextPoint);
                     // Inserting the halfway point should take care of this
                     result.put(medianT, medianPoint);
                     continue;
                 }
             }
             // TODO check angles
             prevT = nextT;
             prevPoint = nextPoint;
         }
         try
         {
             return new PolyLine2d(result.values().iterator());
         }
         catch (NullPointerException | DrawRuntimeException e)
         {
             // Cannot happen? Really?
             e.printStackTrace();
             throw new DrawRuntimeException(e);
         }
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two control points.
      * @param size int; the number of points for the B&eacute;zier curve
      * @param start Point3d; the start point of the B&eacute;zier curve
      * @param control1 Point3d; the first control point
      * @param control2 Point3d; the second control point
      * @param end Point3d; the end point of the B&eacute;zier curve
      * @return PolyLine3d; an approximation of a cubic B&eacute;zier curve between start and end, with the two provided control
      *         points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final int size, final Point3d start, final Point3d control1, final Point3d control2,
             final Point3d end) throws DrawRuntimeException
     {
         return bezier(size, start, control1, control2, end);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two control points with a specified precision.
      * @param epsilon double; the precision.
      * @param start Point3d; the start point of the B&eacute;zier curve
      * @param control1 Point3d; the first control point
      * @param control2 Point3d; the second control point
      * @param end Point3d; the end point of the B&eacute;zier curve
      * @return PolyLine3d; an approximation of a cubic B&eacute;zier curve between start and end, with the two provided control
      *         points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final double epsilon, final Point3d start, final Point3d control1, final Point3d control2,
             final Point3d end) throws DrawRuntimeException
     {
         return bezier(epsilon, start, control1, control2, end);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end.
      * @param size int; the number of points for the B&eacute;zier curve
      * @param start Ray3d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray3d; the end point and end direction of the B&eacute;zier curve
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, with the two provided control
      *         points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final int size, final Ray3d start, final Ray3d end) throws DrawRuntimeException
     {
         return cubic(size, start, end, 1.0);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end with specified precision.
      * @param epsilon double; the precision.
      * @param start Ray3d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray3d; the end point and end direction of the B&eacute;zier curve
      * @return PolyLine2d; an approximation of a cubic B&eacute;zier curve between start and end, with the two provided control
      *         points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final double epsilon, final Ray3d start, final Ray3d end) throws DrawRuntimeException
     {
         return cubic(epsilon, start, end, 1.0);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end.
      * @param size int; the number of points for the B&eacute;zier curve
      * @param start Ray3d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray3d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0 and finite
      * @return a cubic B&eacute;zier curve between start and end, with the two determined control points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final int size, final Ray3d start, final Ray3d end, final double shape)
             throws DrawRuntimeException
     {
         Throw.when(Double.isNaN(shape) || Double.isInfinite(shape) || shape <= 0, DrawRuntimeException.class,
                 "shape must be a finite, positive value");
         return cubic(size, start, end, shape, false);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end with specified precision.
      * @param epsilon double; the precision.
      * @param start Ray3d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray3d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0 and finite
      * @return a cubic B&eacute;zier curve between start and end, with the two determined control points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final double epsilon, final Ray3d start, final Ray3d end, final double shape)
             throws DrawRuntimeException
     {
         Throw.when(Double.isNaN(shape) || Double.isInfinite(shape) || shape <= 0, DrawRuntimeException.class,
                 "shape must be a finite, positive value");
         return cubic(epsilon, start, end, shape, false);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end. The z-value is interpolated in a linear way.
      * @param size int; the number of points for the B&eacute;zier curve
      * @param start Ray3d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray3d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0
      * @param weighted boolean; control point distance relates to distance to projected point on extended line from other end
      * @return a cubic B&eacute;zier curve between start and end, with the two determined control points
      * @throws NullPointerException when start or end is null
      * @throws DrawRuntimeException in case size is less than 2, start is at the same location as end, shape is invalid, or the
      *             B&eacute;zier curve could not be constructed
      */
     public static PolyLine3d cubic(final int size, final Ray3d start, final Ray3d end, final double shape,
             final boolean weighted) throws NullPointerException, DrawRuntimeException
     {
         Point3d[] points = createControlPoints(start, end, shape, weighted);
         return cubic(size, points[0], points[1], points[2], points[3]);
     }
 
     /**
      * Approximate a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end with specified precision.
      * @param epsilon double; the precision.
      * @param start Ray3d; the start point and start direction of the B&eacute;zier curve
      * @param end Ray3d; the end point and end direction of the B&eacute;zier curve
      * @param shape shape factor; 1 = control points at half the distance between start and end, &gt; 1 results in a pointier
      *            shape, &lt; 1 results in a flatter shape, value should be above 0, finite and not NaN
      * @param weighted boolean; control point distance relates to distance to projected point on extended line from other end
      * @return PolyLine3d; an approximation of a cubic B&eacute;zier curve between start and end, with the two determined
      *         control points
      * @throws NullPointerException when start or end is null
      * @throws DrawRuntimeException in case size is less than 2, start is at the same location as end, shape is invalid, or the
      *             B&eacute;zier curve could not be constructed
      */
     public static PolyLine3d cubic(final double epsilon, final Ray3d start, final Ray3d end, final double shape,
             final boolean weighted) throws NullPointerException, DrawRuntimeException
     {
         Point3d[] points = createControlPoints(start, end, shape, weighted);
         return cubic(epsilon, points[0], points[1], points[2], points[3]);
     }
 
     /**
      * Create control points for a cubic B&eacute;zier curve defined by two Rays.
      * @param start Ray3d; the start point (and direction)
      * @param end Ray3d; the end point (and direction)
      * @param shape double; the shape; higher values put the generated control points further away from end and result in a
      *            pointier B&eacute;zier curve
      * @param weighted boolean;
      * @return Point3d[]; an array of four Point3d elements: start, the first control point, the second control point, end.
      */
     private static Point3d[] createControlPoints(final Ray3d start, final Ray3d end, final double shape, final boolean weighted)
     {
         Throw.whenNull(start, "start point may not be null");
         Throw.whenNull(end, "end point may not be null");
         Throw.when(start.distanceSquared(end) == 0, DrawRuntimeException.class,
                 "Cannot create control points if start and end points coincide");
         Throw.when(Double.isNaN(shape) || shape <= 0 || Double.isInfinite(shape), DrawRuntimeException.class,
                 "shape must be a finite, positive value");
 
         Point3d control1;
         Point3d control2;
         if (weighted)
         {
             // each control point is 'w' * the distance between the end-points away from the respective end point
             // 'w' is a weight given by the distance from the end point to the extended line of the other end point
             double distance = shape * start.distance(end);
             double dStart = start.distance(end.projectOrthogonalExtended(start));
             double dEnd = end.distance(start.projectOrthogonalExtended(end));
             double wStart = dStart / (dStart + dEnd);
             double wEnd = dEnd / (dStart + dEnd);
             control1 = start.getLocation(distance * wStart);
             control2 = end.getLocationExtended(-distance * wEnd);
         }
         else
         {
             // each control point is half the distance between the end-points away from the respective end point
             double distance = shape * start.distance(end) / 2.0;
             control1 = start.getLocation(distance);
             control2 = end.getLocationExtended(-distance);
         }
         return new Point3d[] {start, control1, control2, end};
     }
 
     /**
      * Construct a cubic B&eacute;zier curve from start to end with two generated control points at half the distance between
      * start and end. The z-value is interpolated in a linear way. The size of the constructed curve is
      * <code>DEFAULT_BEZIER_SIZE</code>.
      * @param start Ray3d; the start point and orientation of the B&eacute;zier curve
      * @param end Ray3d; the end point and orientation of the B&eacute;zier curve
      * @return a cubic B&eacute;zier curve between start and end, with the two provided control points
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d cubic(final Ray3d start, final Ray3d end) throws DrawRuntimeException
     {
         return cubic(DEFAULT_BEZIER_SIZE, start, end);
     }
 
     /**
      * Calculate the cubic B&eacute;zier point with B(t) = (1 - t)<sup>3</sup>P<sub>0</sub> + 3t(1 - t)<sup>2</sup>
      * P<sub>1</sub> + 3t<sup>2</sup> (1 - t) P<sub>2</sub> + t<sup>3</sup> P<sub>3</sub>.
      * @param t double; the fraction
      * @param p0 double; the first point of the curve
      * @param p1 double; the first control point
      * @param p2 double; the second control point
      * @param p3 double; the end point of the curve
      * @return the cubic bezier value B(t)
      */
     @SuppressWarnings("checkstyle:methodname")
     private static double B3(final double t, final double p0, final double p1, final double p2, final double p3)
     {
         double t2 = t * t;
         double t3 = t2 * t;
         double m = (1.0 - t);
         double m2 = m * m;
         double m3 = m2 * m;
         return m3 * p0 + 3.0 * t * m2 * p1 + 3.0 * t2 * m * p2 + t3 * p3;
     }
 
     /**
      * Construct a B&eacute;zier curve of degree n.
      * @param size int; the number of points for the B&eacute;zier curve to be constructed
      * @param points Point3d...; the points of the curve, where the first and last are begin and end point, and the intermediate
      *            ones are control points. There should be at least two points.
      * @return the B&eacute;zier value B(t) of degree n, where n is the number of points in the array
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d bezier(final int size, final Point3d... points) throws DrawRuntimeException
     {
         Throw.when(points.length < 2, DrawRuntimeException.class, "Too few points; need at least two");
         Throw.when(size < 2, DrawRuntimeException.class, "size too small (must be at least 2)");
         Point3d[] result = new Point3d[size];
         double[] px = new double[points.length];
         double[] py = new double[points.length];
         double[] pz = new double[points.length];
         for (int i = 0; i < points.length; i++)
         {
             px[i] = points[i].x;
             py[i] = points[i].y;
             pz[i] = points[i].z;
         }
         for (int n = 0; n < size; n++)
         {
             double t = n / (size - 1.0);
             double x = Bn(t, px);
             double y = Bn(t, py);
             double z = Bn(t, pz);
             result[n] = new Point3d(x, y, z);
         }
         return new PolyLine3d(result);
     }
 
     /**
      * Approximate a B&eacute;zier curve of degree n using <code>DEFAULT_BEZIER_SIZE</code> points.
      * @param points Point3d...; the points of the curve, where the first and last are begin and end point, and the intermediate
      *            ones are control points. There should be at least two points.
      * @return the B&eacute;zier value B(t) of degree n, where n is the number of points in the array
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d bezier(final Point3d... points) throws DrawRuntimeException
     {
         return bezier(DEFAULT_BEZIER_SIZE, points);
     }
 
     /**
      * Approximate a B&eacute;zier curve of degree n with a specified precision.
      * @param epsilon double; the precision.
      * @param points Point3d...; the points of the curve, where the first and last are begin and end point, and the intermediate
      *            ones are control points. There should be at least two points.
      * @return PolyLine3d; an approximation of a cubic B&eacute;zier curve between start and end, with the provided control
      *         points
      * @throws NullPointerException when points contains a null value
      * @throws DrawRuntimeException in case the number of points is less than 2 or the B&eacute;zier curve could not be
      *             constructed
      */
     public static PolyLine3d bezier(final double epsilon, final Point3d... points)
             throws NullPointerException, DrawRuntimeException
     {
         Throw.when(points.length < 2, DrawRuntimeException.class, "Too few points; need at least two");
         Throw.when(Double.isNaN(epsilon) || epsilon <= 0, DrawRuntimeException.class,
                 "epsilonPosition must be a positive number");
         if (points.length == 2)
         {
             return new PolyLine3d(points[0], points[1]);
         }
         NavigableMap<Double, Point3d> result = new TreeMap<>();
         double[] px = new double[points.length];
         double[] py = new double[points.length];
         double[] pz = new double[points.length];
         for (int i = 0; i < points.length; i++)
         {
             Point3d p = points[i];
             Throw.whenNull(p, "points contains a null value");
             px[i] = p.x;
             py[i] = p.y;
             pz[i] = p.z;
         }
         int initialSize = points.length - 1;
         for (int n = 0; n < initialSize; n++)
         {
             double t = n / (initialSize - 1.0);
             double x = Bn(t, px);
             double y = Bn(t, py);
             double z = Bn(t, pz);
             result.put(t, new Point3d(x, y, z));
         }
         // Walk along all point pairs and see if additional points need to be inserted
         Double prevT = result.firstKey();
         Point3d prevPoint = result.get(prevT);
         Map.Entry<Double, Point3d> entry;
         while ((entry = result.higherEntry(prevT)) != null)
         {
             Double nextT = entry.getKey();
             Point3d nextPoint = entry.getValue();
             double medianT = (prevT + nextT) / 2;
             double x = Bn(medianT, px);
             double y = Bn(medianT, py);
             double z = Bn(medianT, pz);
             Point3d medianPoint = new Point3d(x, y, z);
             Point3d projectedPoint = medianPoint.closestPointOnSegment(prevPoint, nextPoint);
             double errorPosition = medianPoint.distance(projectedPoint);
             if (errorPosition >= epsilon)
             {
                 // We need to insert another point
                 result.put(medianT, medianPoint);
                 continue;
             }
             if (prevPoint.distance(nextPoint) > epsilon)
             {
                 // Check for an inflection point by creating additional points at one quarter and three quarters. If these
                 // are on opposite sides of the line from prevPoint to nextPoint; there must be an inflection point.
                 // https://stackoverflow.com/questions/1560492/how-to-tell-whether-a-point-is-to-the-right-or-left-side-of-a-line
                 double quarterT = (prevT + medianT) / 2;
                 double quarterX = Bn(quarterT, px);
                 double quarterY = Bn(quarterT, py);
                 int sign1 = (int) Math.signum((nextPoint.x - prevPoint.x) * (quarterY - prevPoint.y)
                         - (nextPoint.y - prevPoint.y) * (quarterX - prevPoint.x));
                 double threeQuarterT = (nextT + medianT) / 2;
                 double threeQuarterX = Bn(threeQuarterT, px);
                 double threeQuarterY = Bn(threeQuarterT, py);
                 int sign2 = (int) Math.signum((nextPoint.x - prevPoint.x) * (threeQuarterY - prevPoint.y)
                         - (nextPoint.y - prevPoint.y) * (threeQuarterX - prevPoint.x));
                 if (sign1 != sign2)
                 {
                     // There is an inflection point
                     System.out.println("Detected inflection point between " + prevPoint + " and " + nextPoint);
                     // Inserting the halfway point should take care of this
                     result.put(medianT, medianPoint);
                     continue;
                 }
             }
             // TODO check angles
             prevT = nextT;
             prevPoint = nextPoint;
         }
         try
         {
             return new PolyLine3d(result.values().iterator());
         }
         catch (NullPointerException | DrawRuntimeException e)
         {
             // Cannot happen? Really?
             e.printStackTrace();
             throw new DrawRuntimeException(e);
         }
     }
 
     /**
      * Calculate the B&eacute;zier point of degree n, with B(t) = Sum(i = 0..n) [C(n, i) * (1 - t)<sup>n-i</sup> t<sup>i</sup>
      * P<sub>i</sub>], where C(n, k) is the binomial coefficient defined by n! / ( k! (n-k)! ), ! being the factorial operator.
      * @param t double; the fraction
      * @param p double...; the points of the curve, where the first and last are begin and end point, and the intermediate ones
      *            are control points
      * @return the B&eacute;zier value B(t) of degree n, where n is the number of points in the array
      */
     @SuppressWarnings("checkstyle:methodname")
     private static double Bn(final double t, final double... p)
     {
         double b = 0.0;
         double m = (1.0 - t);
         int n = p.length - 1;
         double fn = factorial(n);
         for (int i = 0; i <= n; i++)
         {
             double c = fn / (factorial(i) * (factorial(n - i)));
             b += c * Math.pow(m, n - i) * Math.pow(t, i) * p[i];
         }
         return b;
     }
 
     /**
      * Calculate factorial(k), which is k * (k-1) * (k-2) * ... * 1. For factorials up to 20, a lookup table is used.
      * @param k int; the parameter
      * @return factorial(k)
      */
     private static double factorial(final int k)
     {
         if (k < fact.length)
         {
             return fact[k];
         }
         double f = 1;
         for (int i = 2; i <= k; i++)
         {
             f = f * i;
         }
         return f;
     }
 
 }