Scalar types with unit (#25 - #26)

25. Float with unit

The internal storage of the value that is transmitted is always in the SI (or standard) unit. The value is preceded by a one-byte unit type (see the table above) and a one-byte display type (see Display types). As an example: suppose the unit indicates that the type is a length, whereas the display type indicates that the internally stored value 60000.0 should be displayed as 60.0 km, this is coded as follows (assuming big-endian encoding):

|25|16|11|0x47|0x6A|0x60|0x00|

26. Double with unit

The internal storage of the value that is transmitted is always in the SI (or standard) unit. The value is preceded by a one-byte unit type (see the table above) and a one-byte display type (see Display types). As an example: suppose the unit indicates that the type is a length, whereas the display type indicates that the internally stored value 60000.0 should be displayed as 60.0 km, this is coded as follows (assuming big-endian encoding):

|26|16|11|0x47|0x6A|0x60|0x00|0x00|0x00|0x00|0x00|